If getting your printer to work is troublesome enough, it's a good thing getting to know its features shouldn't be much of a problem. More often than not, the average user may take a bit longer to familiarize his/her new printer because of its curvy, not-so-intuitive, design (and not because of the absence of such feature.) For HP OfficeJet 3830, is no exception but the solutions are easier than you think.
Loading Paper
The HP OfficeJet 3830 shares commonality of features performs like any other multifunction printer. Perhaps its sleek contour design confounds many users where to place the paper. Here's a tip, look for the paper icon usually placed above or behind where the output tray is located.
You might have overlooked it but there is an additional paper support located at the back of the printer which needs to be pulled out and locked into place.
This is how to locate the loading tray:
1.Open the HP Officejet 3830 printer lid.
2.Locate the paper icon.
3.Pull out the additional paper support located at the back of the printer.
4.Lock into place.
5.Load paper into the input tray.
6.Close the lid.
Replacing an Empty Ink Cartridge
An empty ink cartridge will cause your printouts to be either blank or come out with faded colors. Here's how you can replace it with a new one:
1.Open the printer lid.
2.Locate the ink cartridge icon.
3.Press down on the ink cartridge to release it.
4.Pull the ink cartridge out of the printer.
5.Unpack the new ink cartridge.
6.Remove the plastic protective cap from the new ink cartridge.
7.Insert the new ink cartridge into the printer.
You can purchase quality and affordable ink cartridges (HP 63XL High Yield) for your HP OfficeJet 3830 here at Smart Print Supplies by clicking this link:
https://smartprintsupplies.com/collections/officejet-3830/products/sps-hp-63xl?variant=31579582234671